FMM Tappits SCRIPT Alphabet Cutters - Upper Case PLUS Numbers

FMM

£4.99 

Share:

Script Upper Case Alphabet and Number Tappet Cutters


These cutters are designed to create SCRIPT font upper case Capital letters and numbers.

They come in 4 strips of cutters with full alphabet A-Z and numbers 0-9.

Each of the Upper Letters and Numbers measure approximately 20mm in height and 20mm in width and are approximately 3mm deep.

The cutters are made from food safe plastic and are produced and manufactured by leading manufacturer FMM.

All items are new and sealed and FMM Upper Tappits come with detailed instructions.


 

Instructions and Tips for Use


This fantastic range of cutters from FMM are very versatile and simple to use.

Lightly grease a non-stick board with Trex or other white fat or shortening and roll out Mexican paste very thinly. (Other pastes may be used but I find Mexican to be the best as it doesn't stretch too much, can be rolled thinly and doesn't dry out too quickly)
Very lightly dust the top surface of your paste with Cornflour (cornstarch) a tip here is to put the flour into a muslin cloth and simply wipe across the top surface - that way you don't get too much onto the paste.

Press the tappit set firmly onto the paste ensuring that you press all areas of the cutter. 'Flick' the cutter off the paste by placing a fingernail under one end and lifting rapidly. The paste should remain on the board. Carefully peel away the excess paste leaving your required letters or shapes.

Lift the cut shapes with a palette knife and fix in position with a little edible glue.
As with Patchwork cutters the paste can be coloured before cutting out, painted or dusted with lustre colours before fixing in position.

You may need to practice a little to get the thickness of the rolled paste just right - it needs to be thin enough the cut through but be thick enough to allow the detail on the cutters to show.