FMM Tappits BLOCK Alphabet Cutters - Lower Case
Tappit Alphabet Cutters - Block Lower Case
This fantastic Block Alphabet Set is very high quality and made by leading sugarcraft equipment company FMM.
A very easy way to produce names and words in a lower case way. These cutters approximately measure 15mm high. Sold in new and sealed packaging!
Instructions and Tips for Use
Lightly grease a non-stick board with Trex or other white fat or shortening and roll out Mexican paste very thinly. (Other pastes may be used but I find Mexican to be the best as it doesn’t stretch too much, can be rolled thinly and doesn’t dry out too quickly)
Very lightly dust the top surface of your paste with Cornflour (cornstarch) a tip here is to put the flour into a muslin cloth and simply wipe across the top surface – that way you don’t get too much onto the paste.
Press the tappit set firmly onto the paste ensuring that you press all areas of the cutter. ‘Flick’ the cutter off the paste by placing a fingernail under one end and lifting rapidly. The paste should remain on the board. Carefully peel away the excess paste leaving your required letters or shapes.
Lift the cut shapes with a palette knife and fix in position with a little edible glue.
As with Patchwork cutters the paste can be coloured before cutting out, painted or dusted with lustre colours before fixing in position.
You may need to practice a little to get the thickness of the rolled paste just right – it needs to be thin enough the cut through but be thick enough to allow the detail on the cutters to show.